01603 702400 info@enginetuning.net
Mysterious Ford Fiesta ST running problems

Mysterious Ford Fiesta ST running problems

We were asked to investigate a problem Ford Fiesta ST 1.6 turbo. The customer had recently purchased the car second hand and had immediately experienced problems where the car would go into a limp home mode with the engine warning light coming on making the car...
Ford Focus ST2 2.0 Revo stage 2 conversion

Ford Focus ST2 2.0 Revo stage 2 conversion

In the workshop this week a Ford Focus ST2 2.0 Turbo for a Revo stage 2 conversion . This vehicle already had a Milltek cat back exhaust but required the Milltek down pipe with high flow cat fitted . A much larger Airtec inter cooler is required to keep the charge...

Golf R Stage 2 Revo build 400 BHP Conversion

In the workshop this week a stunning Golf R 2.0 TSI 300 bhp standard vehicle. Customer requested a stage 2 build to achieve 400 BHP . This required an Airtec larger inter-cooler requiring removal of the front bumper and crash bars as the inter-cooler is sandwiched...
Audi RS4 V8 B7 Inlet valve cleaning

Audi RS4 V8 B7 Inlet valve cleaning

Audi RS4 V8 in the workshop for an engine management light on the fault was related to the solenoid used to control the secondary air . The solenoid is located underneath the inlet manifold and requires quite a bit of stripping down . Once the manifold was removed we...
Social media & sharing icons powered by UltimatelySocial