01603 702400 info@enginetuning.net
Ford Focus ST2 2.0 Revo stage 2 conversion

Ford Focus ST2 2.0 Revo stage 2 conversion

In the workshop this week a Ford Focus ST2 2.0 Turbo for a Revo stage 2 conversion . This vehicle already had a Milltek cat back exhaust but required the Milltek down pipe with high flow cat fitted . A much larger Airtec inter cooler is required to keep the charge...

Golf R Stage 2 Revo build 400 BHP Conversion

In the workshop this week a stunning Golf R 2.0 TSI 300 bhp standard vehicle. Customer requested a stage 2 build to achieve 400 BHP . This required an Airtec larger inter-cooler requiring removal of the front bumper and crash bars as the inter-cooler is sandwiched...
Audi RS4 V8 B7 Inlet valve cleaning

Audi RS4 V8 B7 Inlet valve cleaning

Audi RS4 V8 in the workshop for an engine management light on the fault was related to the solenoid used to control the secondary air . The solenoid is located underneath the inlet manifold and requires quite a bit of stripping down . Once the manifold was removed we...
Audi VW TFSI inlet valve cleaning

Audi VW TFSI inlet valve cleaning

We can save considerable costs across the range of VW , Audi ,Seat and Skoda range of cars which suffer with carbon build up on the inlet valves and inlet ports causing a lack of power and hesitations and increased fuel consumption. Using the Tunap inlet valve...
Mercedes C200  With DPF issues

Mercedes C200 With DPF issues

Mercedes DPF Cleaning The DPF doctor Norwich. We were asked to check out a Mercedes with an on going DPF fault and an engine warning light on . Our initial assessment revealed a faulty pressure sensor this had caused the DPF to block and put on the engine warning...
Audi RS6 Can we fix what the dealer can’t?

Audi RS6 Can we fix what the dealer can’t?

We were asked by a regular customer with an Audi RS6 if we could take a look at a very frustrating problem on his car. The vehicle is a low mileage which is still under manufacturer’s warranty having only covered 13,000 miles.          View of the RS6 engine bay A.B.S...
Audi RS6 C7 Revo stage 2 with Milltek Exhaust

Audi RS6 C7 Revo stage 2 with Milltek Exhaust

[fusion_text]This fantastic Audi RS6 is a vehicle that we know well having already fitted the rear Milltek exhaust and with Revo stage 1 . We were asked to fit the Milltek down pipes and new center exhaust sections complete with high flow cats as well as the Revo...
VAG 1.6 COMMON RAIL INJECTOR FAULTS

VAG 1.6 COMMON RAIL INJECTOR FAULTS

VAG 1.6 common rail injector faults causing blocked DPD filters We are seeing more and more injector issues with the 1.6 common rail VAG engines . There is some contention that this has been made worse with the emissions update software we are not sure if this is...
Social media & sharing icons powered by UltimatelySocial